Motorola Codes

[Will.Spencer]

These are the level one and two service commands for the Motorola V8088. Other Motorola models may vary.

#(hold down for 2 seconds) Enter manual test mode
01# Exit manual test mode
07x# Mute RX audio path
08# Unmute RX audio path
09# Mute TX audio path
10# Unmute TX audio path
15x# Generate tone
16# Mute tone generator
19# Display S/W version number of Call Processor
20# Display S/W version number of Modem
36# Initiate acoustic loopback
37# Stop test
38# Activate Mini SIM
39# Deactivate Mini SIM
43x# Change audio path
47x# Set audio volume
51# Enable sidetone
52# Disable sidetone
57# Initialize non-volatile memory
58# Display security code
58xxxxxx# Modify security code
59# Display lock code
59xxx# Modify lock code
60# Display IMEI
99# Display all display pixels

15XX#
90# Vibrator
91# Ringer

36XX#
0 or Omitted Full Rate
1 Enhanced Full rate
2 Half Rate

56X#
0# Turn Off any visual Alert if On
1# Turn on Green LED
2# Turn on Red LED
3# Turn on Yellow LED
4# Flash Green LED
5# Flash Red LED
6# Flash Yellow LED

98XX#
20# GSM 1800
21# GSM 900
23# Dual Band 900 / 1800